●
LDAP Authentication. Use the LDAP Authentication screen to configure a Lightweight Directory
Access Protocol (LDAP) server to authenticate device users.
NOTE The LDAP Authentication option is not available for the HP LaserJet M5025 MFP.
●
Edit Other Links. Use the Edit Other Links screen to add or customize up to five links to the Web
sites of your choice.
●
Device Information. Use the Device Information screen to provide a name of your choice for the
device, assign an asset number, and configure the company name, the person to contact about
the device, and the physical location of the device.
●
Language. Use the Language screen to select the language in which the HP EWS screens
appear.
●
Date & Time. Use the Date & Time screen to set the correct date and time for the device.
●
Wake Time. IT administrators can use the Wake Time screen to schedule the device to turn on at
a certain time on a daily basis.
Not all of the screens on the tab appear in this document. For more information, see the HP Embedded
Web Server User Guide.
Configure Device screen
You can obtain device configuration information through a Web browser by opening the HP EWS screen
and changing the basic configuration information on the Settings tab. Security and password controls
give management information systems (MIS) managers the level of control that they require within their
network environments.
NOTE For more information, see the HP Embedded Web Server User Guide.
The following figure shows an example of device options that can be configured remotely.
Figure 2-7 HP EWS Settings tab – Configure Device screen
ENWW HP Embedded Web Server 49
Software description
To Next Page
Loading...
