HP LASERJET M575 - Page 156

Document feeder hinge assy
1. Before proceeding, remove the following:
●
Rear-upper cover. See
Rear-upper cover on page 95.
●
Foam reflector kit. See
Foam reflector kit on page 38.
●
Document feeder whole unit.
◦
See
Document feeder whole unit on page 127.
◦
See
Document feeder whole unit (M575c model) on page 130.
2. Remove four screws and the hinge assembly.
Figure 1-193 Remove the docuement feeder hinge assembly
132 Chapter 1 Removal and replacement ENWW