Delivery fan, cartridge fan, and environmental sensor
Before proceeding, remove the following components:
●
Toner-collection unit. See
Toner-collection unit on page 15.
●
Left cover. See
Left cover on page 92.
Remove the delivery fan, cartridge fan, and environmental sensor
1. Remove five screws (callout 1), and then remove the sheet-metal plate (callout 2).
NOTE: Release the small sheet-metal plate (callout 3) to allow access to the larger sheet-metal
plate behind it. Leave the smaller plate attached to the chassis.
Figure 1-228 Remove the delivery fan, cartridge fan, and environmental sensor (1 of 9)
2
1
3
158 Chapter 1 Removal and replacement ENWW
To Next Page
Loading...