Print individual fax reports
1. On the control panel, press the Setup button.
2. Use the arrow buttons to select the Reports menu, and then press the OK button.
3. Use the arrow buttons to select the Fax Reports menu, and then press the OK button.
4. Use the arrow buttons to select the report to be printed, and then press the OK button. The product
exits the menu settings and prints the report.
NOTE: If you selected the Fax Activity log report and pressed the OK button, press the OK
button again to select the Print log now option. The product exits the menu settings and prints the
log.
Set the fax activity log to print automatically
You can decide whether or not you want the fax log to print automatically after every 40 entries. The
factory-set default is On. Use the following steps to set the fax activity log to print automatically:
1. On the control panel, press the Setup
button.
2. Use the arrow buttons to select the Reports menu, and then press the OK button.
3. Use the arrow buttons to select the Fax Reports menu, and then press the OK button.
4. Use the arrow buttons to select the Fax Activity log menu, and then press the OK button.
5. Use the arrow buttons to select the Auto Log Print menu, and then press the OK button.
6. Use the arrow buttons to select the On option, and then press the OK button to confirm the
selection.
Set the fax error report
A fax error report is a brief report that indicates the product experienced a fax job error. It can be set to
print after the following events:
●
Every fax error (the factory-set default)
●
Send fax error
●
Receive fax error
●
Never
NOTE: If you select Never, you will have no indication that a fax failed to be transmitted unless you
print a fax activity log.
1. On the control panel, press the Setup button.
2. Use the arrow buttons to select the Reports menu, and then press the OK button.
3. Use the arrow buttons to select the Fax Reports menu, and then press the OK button.
4. Use the arrow buttons to select the Fax Error report menu, and then press the OK button.
5. Use the arrow buttons to select the option for when you want the fax error reports to be printed.
6. Press the OK button to save the selection.
ENWW Solve fax problems (HP LaserJet Professional M1210 MFP series only) 169
To Next Page
Loading...