HP LaserJet Pro M1130 - Multifunction Printer - Left Cover Removal

Left cover
Before proceeding, remove the following components:
●
Paper-delivery tray. See
Paper-delivery tray (output bin extension) on page 21.
Remove the left cover
1. Remove one screw (callout 1) and then release one tab (callout 3).
NOTE: HP LaserJet Professional M1210 MFP series only: If installed, remove the protective
telephone jack insert (callout 2).
Figure 1-27 Remove the left cover (1 of 6)
3
1
2
2. Raise the control-panel assembly, and then release one tab at the bottom of the product (callout 1).
Figure 1-28 Remove the left cover (2 of 6)
1
22 Chapter 1 Removal and replacement ENWW