HP LaserJet Pro M1130 - Multifunction Printer - Scanner Assembly Replacement

Scanner assembly
Before proceeding, remove the following components:
●
Paper-delivery tray. See
Paper-delivery tray (output bin extension) on page 21.
●
Left cover. See
Left cover on page 22.
Remove the scanner assembly
1. HP LaserJet Professional M1130 MFP series: Disconnect one FFC (callout 1).
HP LaserJet Professional M1210 MFP series: Disconnect one FFC (callout 1) and one wire
harness connector (callout 2).
Figure 1-42 Remove the scanner assembly (1 of 5; HP LaserJet Professional M1130 MFP series)
1
Figure 1-43 Remove the scanner assembly (2 of 5; HP LaserJet Professional M1210 MFP series)
1
2
30 Chapter 1 Removal and replacement ENWW