HP LaserJet Pro M1130 - Multifunction Printer - Page 51

2. Support the scanner assembly, and then release one tab (callout 1) and remove the scanner
support (callout 2).
CAUTION: The scanner assembly is not captive and can easily be separated from the product
base if it is opened too far.
Figure 1-44 Remove the scanner assembly (3 of 5)
1
2
3. HP LaserJet Professional M1130 MFP series only: Carefully feed the FFC through the slot in the
chassis (callout 1), and then lift the scanner assembly up and off of the product base.
Figure 1-45 Remove the scanner assembly (4 of 5)
1
ENWW Covers 31