HP LaserJet Pro M402d - Page 195

Certicate of Volatility
Figure A-7 Certicate of Volatility M402/M403 (1 of 2)
Hewlett-Packard Certificate of Volatility
Model: Part Number: Address:
HP LaserJet Pro M402
HP LaserJet Pro M403
M402n=C5F93A; M402d=C5F92A
M402dn=C5F94A/G3V21A;
M402dw=C5F95A; M403n=F6J41A;
M403d=F6J42A; M403dn=F6J43a;
M403dw=F6J44A
Hewlett Packard Company
11311 Chinden Blvd
Boise, ID 83714
Volatile Memory
Does the device contain volatile memory (Memory whose contents are lost when power is removed)?
Yes No If Yes please describe the type, size, function, and steps to clear the memory below
Type (SRAM, DRAM, etc): Size: User Modifiable: Function: Steps to clear memory:
SDRAM-DDR3 128MB Yes No Print job specific information,
and information stored in RAM
disk.
When the printer is powered
off, the memory is erased.
Type (SRAM, DRAM, etc): Size: User Modifiable: Function: Steps to clear memory:
Yes No
Type (SRAM, DRAM, etc): Size: User Modifiable: Function: Steps to clear memory:
Yes No
Non-Volatile Memory
Does the device contain non-volatile memory (Memory whose contents are retained when power is removed)?
Yes No If Yes please describe the type, size, function, and steps to clear the memory below
Type (Flash, EEPROM, etc): Size: User Modifiable: Function: Steps to clear memory:
EEPROM 16KB Yes No Printer specific data such as
page count, configuration etc.
Perform a NVRAM initialization
to clear unprotected data as
explained in SM (for service
person to perform only).
Type (Flash, EEPROM, etc): Size: User Modifiable: Function: Steps to clear memory:
NAND Flash 128MB Yes No FW code/partial printer
configuration information
storage.
Perform a NVRAM initialization
to clear unprotected data as
explained in SM (for service
person to perform only).
Type (Flash, EEPROM, etc): Size: User Modifiable: Function: Steps to clear memory:
Yes No
Mass Storage
Does the device contain mass storage memory (Hard Disk Drive, Tape Backup)?
Yes No If Yes please describe the type, size, function, and steps to clear the memory below
Type (HDD, Tape, etc): Size: User Modifiable: Function: Steps to clear memory:
Yes No
Type (HDD, Tape, etc): Size: User Modifiable: Function: Steps to clear memory:
Yes No
USB
Does the item accept USB input and if so, for what purpose (i.e Print Jobs, device firmware updates, scan upload)?
Yes No If Yes please describe below
The front USB host can accept print jobs, scan uploads, photos and can be used to upload printer firmware.
Can any data other than scan upload be sent to the USB device)?
Yes No If Yes please describe below
Rear USB host when configured will accept stored jobs, encrypted files stored and deleted by user.
ENWW Certicate of Volatility 177