Motors, clutches, and solenoids
The following gure shows the motors, clutches, and solenoids for the pickup, feed, and delivery system.
Figure 1-23 Motors, solenoids, and clutches
Table 1-14 Motors, solenoids, and clutches
Abbreviation Component
M1 Fuser motor
SL1 Cassette pickup solenoid
SL2 Multipurpose tray pickup solenoid
SL3 Duplex switchback solenoid (duplex models only)
CL1 Duplex re-pickup clutch (duplex models only)
Jam detection/prevention
The printer uses the following sensors to detect the paper as it moves through the paper path and to report
to the DC controller if the paper has jammed.
●
Top of page (TOP) sensor (SR2)
●
Media width sensor (SR1a)
●
Fuser output sensor (SR13)
●
Duplex feed sensor (SR2a)
ENWW Pickup, feed, and delivery system 31
To Next Page
Loading...