Paper feeder (optional Tray 3)
This section describes the paper feeder (optional Tray 3).
Basic operation
The paper feeder is optionally installed at bottom of the printer. It picks up the print media and feeds it to the
printer. The paper DC controller controls the operational sequence of the paper feeder.
Paper path
The gure below shows the optional Tray 3 paper path.
Figure 1-25 Optional Tray 3 paper path
Paper feeder controller
The gure below shows the paper feeder controller block diagram. The table in this section describes the
paper feeder electrical components.
ENWW Paper feeder (optional Tray 3) 35
To Next Page
Loading...