Change the color options
1. From the software program, select the Print option.
2. Select the printer, and then click the Properties or Preferences button.
3. Click the Color tab.
4. Select the HP EasyColor check box to clear it.
5. Click the Automatic or Manual setting.
●
Automatic setting: Select this setting for most color print jobs
●
Manual setting: Select this setting to adjust the color settings independently from other settings.
Click the Settings button to open the manual color-adjustment window.
NOTE: Changing color settings manually can impact output. HP recommends that only color
graphics experts change these settings.
6. Click the Print in Grayscale option to print a color document in black and shades of gray. Use this option
to print color documents for photocopying or faxing. Also use this option to print draft copies or to save
color toner.
7. Click the OK button to close the Document Properties dialog box. In the Print dialog box, click the OK
button to print the job.
Calibrate the printer to align the colors
Calibration is a printer function that optimizes print quality.
Follow these steps to resolve print-quality problems such as misaligned color, colored shadows, blurry
graphics, or other print-quality issues.
NOTE: The steps vary according to the type of control panel.
2-line control panels
1. On the printer control panel, press the OK button.
2. Open the following menus:
●
System Setup
●
Print Quality
●
Color Calibration
●
Calibrate Now
110 Chapter 6 Solve problems ENWW
To Next Page
Loading...