26 Using Quick setup
This MAC address applies to the Ethernet port on the AP and to the first (default) wireless
community, referred to as wlan0. The MAC address is incremented by 1 for each additional
wireless community that you create. For example, if the Ethernet and wlan0 interfaces are
assigned MAC address 00:55:9A:3C:7A:00, then the next wireless community you create will
be assigned MAC address 00:55:9A:3C:7A:01, and so on.
Software version
The version of software installed on the AP.
Product identifier
The AP hardware model ID number.
Hardware version
The AP hardware version.
Serial number
The AP serial number.
Device description
Information about the product hardware.
To Next Page
Loading...
