HP M210 802.11n

The HP M210 is a Wi-Fi Alliance authorized Wi-Fi CERTIFIED
802.11a/b/g and 802.11n product. The Wi-Fi CERTIFIED logo
is a certification mark of the Wi-Fi Alliance.
HP M210 802.11n Access Point Quickstart
This Quickstart shows you how to install and get started using the HP M210 Access Point (JL023A AM, JL024A WW).
See also the M210 Configuration and Administration Guide and other M210 documentation available from www.hp.com/support/manuals. The M210 Access
Point is an IEEE 802.11n, dual-band, high-speed access point that provides simplified wireless LAN administration with clustering technology.
Hardware overview
Package contents
M210 Access Point (AP), power supply, documentation.
Ethernet port
The M210 is equipped with an auto-sensing 10/100/1000 BaseT Ethernet port with RJ-45
connector. This port is IEEE 802.3af-compliant enabling the M210
to be powered by Power
over Ethernet (PoE).
Radio and antennas
The M210 features an IEEE 802.11a/b/g/n-compliant radio with internal dual-band omni-
directional MIMO antennas.
Reset button
Press and quickly release the Reset button to restart the M210. To reset the M210 to factory
defaults, press the button until the status lights blink three times, then release.
1 Power LED
2 WLAN LED
3 Ethernet LED
4
6
5
4 Reset button
5 Ethernet connector
6 Power connector
1
2
3
5998-5757_QS_M210.fm Page 1 Tuesday, April 15, 2014 1:29 PM

HP M210 802.11n Specifications

General

Frequency Band	2.4 GHz
Wireless Speed	Up to 300 Mbps
Ports	1 x 10/100 Ethernet
Security	WEP, WPA, WPA2
Weight	0.1 kg

Summary

Product Overview and Hardware

Hardware Overview

Diagram of the M210 access point with labeled ports and indicators.

Package Contents

Lists the items included in the M210 Access Point package.

Ethernet Port Details

Description of the M210's auto-sensing 10/100/1000 BaseT Ethernet port.

Radio and Antennas

Details on the M210's IEEE 802.11a/b/g/n-compliant radio and antennas.

Reset Button Functionality

Explanation of how to restart or reset the M210 to factory defaults.

Status Indicators and Safety Information

Status LEDs

Indicates the meaning of the Power, WLAN, and Ethernet status LEDs.

Important Installation Information

Key safety and regulatory considerations before installing the M210.

Installation and Initial Setup

Mounting the M210

Instructions and recommendations for mounting the M210 on a wall.

Connect and Power On

Steps to connect the M210 to power and the network, then power it on.

Login Process

Procedure for accessing the M210's web-based management tool.

Perform Quick Setup

Guide to the initial configuration steps for the M210.

Wireless Network Configuration

Specify Access Point Settings

Configuring wireless mode, IP address, and administrator credentials.

Specify Access Point Cluster Settings

Options for enabling and configuring clustering for multiple APs.

Specify Wireless Network Settings

Setting the network name (SSID) and security method (WPA/WPA2).

Testing and Specifications

Test the Wireless Network

Steps to verify Internet connectivity and wireless network functionality.

Perform Additional Configuration

Guidance on accessing the management tool for further settings.

Specifications

Technical specifications for the HP M210 Access Point.