Need help?Do you have a question about the HP M220 and is the answer not in the manual?
General| Wireless Speed (5 GHz) | Up to 867 Mbps |
|---|---|
| Wireless Speed (2.4 GHz) | Up to 300 Mbps |
| Management | Web-based management |
| Wireless Standard | IEEE 802.11ac |
| Wireless Standards | 802.11a/b/g/n/ac |
| Frequency Band | 2.4 GHz and 5 GHz |
| Ports | 1 x 10/100/1000 Gigabit Ethernet |
| Security | WPA, WPA2, WEP |
| Security Features | WPA, WPA2, WEP |
| Operating Modes | Access Point |
| Weight | Varies by region |
Illustrates network deployment scenarios for the M220 access point.
Introduces the Quick setup feature for easy configuration of the M220.
Details the sequential steps involved in configuring the M220 via the wizard.
Explains the available security methods (WEP, WPA/WPA2) for wireless networks.
How to set up HTTPS/HTTP status, port, and session timeout for the management tool.
Setting the device's system time and daylight savings preferences.
Defines wireless communities and their role in network segmentation and settings.
How to set up external RADIUS servers for authentication and authorization.
Explains using MAC addresses for controlling wireless network access.
Discusses factors like interference and physical location affecting wireless signal range.
Guidance on choosing optimal radio channels to minimize interference and maximize throughput.
Recommendations for using 802.11n technology, including legacy client support.
Introduces the Wireless Distribution System (WDS) for creating wireless bridges.
Details on how to set up WDS links, including remote address and encryption.
How to configure static or DHCP-assigned IPv4 addresses for the M220.
Assigning wireless traffic to specific VLANs based on community settings.
Explains AP clustering for centralized administration and management of multiple APs.
Conditions and requirements for forming a cluster of M220 access points.
Saving, restoring, and resetting the M220's configuration settings.
Procedures for updating the M220's firmware and managing software images.
Configuring system logging levels, persistence, and depth.
Setting up packet tracing for network traffic analysis and troubleshooting.
Using the ping utility for basic network connectivity diagnostics.
Information on accessing HP's online documentation for the M220.
Steps to restore the M220 to its original factory default settings.
How to perform a factory reset using the M220's web-based management tool.
To Next Page
