HP V-M200

In
The HP V-M200 is a Wi-Fi Alliance authorized Wi-Fi CERTIFIED 802.11a/b/g
and 802.11n product. The Wi-Fi CERTIFIED Logo is a certification mark of
the Wi-Fi Alliance.
HP V-M200 802.11n Access Point Quickstart
This Quickstart shows you how to get started using the HP V-M200 Access Points (US J9467A, WW J9468A).
After reading this Quickstart, you can visit www.hp.com/networking/support and download the HP V-M200 802.11n Access Point Management and
Configuration Guide and other documentation.
Hardware overview
Package contents
V-M200, documentation, three antennas, and power supply.
Ethernet port
The V-M200 is equipped with an auto-sensing 10/100/1000 BaseT Ethernet port with RJ-45
connector. The port supports Power over Ethernet (PoE) 802.3af.
Radio and antennas
The V-M200 features an 802.11a/b/g/n-compliant radio. Three dual-band omni-directional
MIMO antennas are provided. Connect all three antennas and position them as illustrated for
desktop install. For wall mounting, see
Mounting the V-M200 on a wall on page 2.
MIMO antennas
Status lights (left to right)
• Power
•LAN
• WLAN 2.4 GHz
• WLAN 5 GHz
Reset button
Ethernet port
Antenna connector
Power connector

HP V-M200 Specifications

General

Frequency Band	2.4 GHz
Antenna	Internal
Power over Ethernet (PoE)	No
Device Type	Wireless Access Point
Maximum Data Rate	300 Mbps
Wireless Standards	IEEE 802.11b/g
Security	WEP, WPA, WPA2

Summary

Hardware Overview

MIMO Antennas

Description of the dual-stream MIMO antennas included with the HP V-M200.

Status Lights

Explanation of the status indicator lights on the HP V-M200 for Power, LAN, and WLAN.

Ethernet Port

Details of the auto-sensing 10/100/1000 BaseT Ethernet port with RJ-45 connector.

Package Contents

Lists the items included in the HP V-M200 package: device, documentation, antennas, and power supply.

Radio and Antennas

Description of the 802.11a/b/g/n radio and guidance on positioning antennas for optimal performance.

Reset Button and Status Lights

Reset Button Operation

Instructions for restarting and resetting the HP V-M200 to factory defaults using the reset button.

Status Lights Table

Detailed table explaining the state (Off, Blinking, On) and description for Power, Ethernet, WLAN 2.4GHz, and WLAN 5GHz lights.

Important Information Before Installing

Safety Precautions

Crucial safety guidelines related to power distribution, network cables, exposed metal components, and indoor installation.

Powering the V-M200

Explains the power options for the V-M200, including external adapter, PoE switch, or power injector.

Mounting the V-M200 on a Wall

Provides instructions and screw specifications for mounting the V-M200 access point securely on a wall.

Configuring a Simple Wireless Network

Wall Mounting Instructions

Step-by-step guide for drilling holes and mounting the V-M200 on a wall using screws.

Network Topology

Illustrates a basic wireless network setup connecting the V-M200 to a router with a DHCP server and the Internet.

Configuring Your Computer

Steps to configure a computer's static IP address, disable wireless, and connect cables for initial setup.

Logging In to the V-M200

Procedure to access the V-M200 web management tool via IP address and default credentials.

Quick Setup

Guidance on using the Quick Setup feature to choose a network configuration scenario.

Wireless Network Configuration Steps

Quick Setup Wizard

Using the Quick Setup wizard to recommend wireless network settings based on the environment.

Specify Access Point Settings

Configuring the radio mode and IP settings (DHCP server) for the access point.

Configure the Radio

Selecting the optimal wireless mode (e.g., 802.11n, 802.11a/n) based on client support and performance needs.

Get an IP Address

Setting the IP configuration mode for the V-M200, typically as a DHCP client.

Advanced Network Settings

Assigning an IP Address

Methods for assigning an IP address: DHCP server pre-configuration, automatic assignment, or manual static assignment.

Manage Access Point

Options for changing the V-M200 manager account username and password.

Specify Wireless Network Settings

Configuring the wireless network name (SSID) and security method (WPA2, WPA).

Secure Wireless Network

Choosing security methods like WPA, WPA2, or mixed mode for wireless transmission encryption.

Wireless Encryption and Testing

Key Source and Type

Determining how WPA encryption keys are generated (PreShared Key) and explaining WEP security.

Key Format

Selecting the format for the encryption key: ASCII or HEX.

Completing Quick Setup

Finalizing the Quick Setup process by selecting the Save option.

Testing the Wireless Network

Steps to verify wireless connectivity and internet access after configuration.