HP 525 User Manual

The HP 525 is a Wi-Fi Alliance authorized Wi-Fi CERTIFIED
802.11a/b/g/n/ac product. The Wi-Fi CERTIFIED Logo is a certification
mark of the Wi-Fi Alliance.
HP 525 Wireless Dual-Radio
802.11ac Access Point Quick Start
Guide
This quick start guide shows you how to install and get started using the HP
525 Wireless Dual Radio 802.11ac Access Point (RMN BJNGA-FB0004)
JG993A(AM), JG994A(WW), JG995A(JP), JG996A(IL), JG997A(8pack
AM), JG998A(8pack WW), hereafter referred to as the HP 525.
Views
Figure 1 Views
Rear view
1: Mounting hole
2: Antenna port
Front view
Bottom view
3
: 2.4 GHz antenna port
4: Console port
5: Reset button
6: Ethernet port 2
7: Ethernet port 1 (support for PoE)
8: 48 VDC power port
9: Security slot
10:5 GHz antenna port
1 2
3
4
6
7
8
5 9
10
1

HP 525 Specifications

General

Device Type	Wireless Access Point
Frequency Band	2.4 GHz and 5 GHz
Ethernet Ports	1
Wireless Protocol	802.11a/b/g/n
Ports	1 x 10/100/1000 Ethernet port
PoE	802.3af
Antennas	2 internal antennas
Security Features	WPA, WPA2
Power Source	PoE or External Power Adapter
Operating Temperature	0°C to 40°C (32°F to 104°F)
Dimensions	5.7 x 5.7 x 1.3 inches (145 x 145 x 33 mm)

Summary

HP 525 Access Point Overview

Product Details

Ports Description

Description of the various ports available on the HP 525 Access Point.

Radio and Antenna Information

Information on the wireless radios and antenna configurations.

Status and Powering

Status LED Descriptions

Explanation of the LED indicators and their meanings.

Powering the HP 525

Methods and requirements for powering the Access Point.

Installation Preparation

Important Installation Information

Crucial safety and regulatory information to review prior to installation.

Site Selection Guidelines

Guidelines for choosing an optimal and safe location for the AP.

Installation Procedures

Preparation for Installation

Mounting the AP on a Wall

Detailed instructions for mounting the AP onto a wall.

Mounting Methods

Mounting on a Suspended Ceiling

Procedure for installing the AP using a suspended ceiling mount.

Ceiling Tile Mounting

Mounting on a Ceiling Tile

Instructions for attaching the AP to a ceiling tile.

Operation and Support

Removing the AP

Product Specifications Summary

Product Overview Summary

Environmental Conditions

Operating and Storage Conditions

Detailed Technical Specifications

Physical Characteristics

Electrical Characteristics

Ports Specification

Memory and Processor Details

Performance Specifications