HP J9845A

Models
HP 560 Wireless Dual Radio 802.11ac (AM) Access Point J9845A
HP 560 Wireless Dual Radio 802.11ac (WW) Access Point J9846A
HP 560 Wireless Dual Radio 802.11ac (JP) Access Point J9847A
HP 560 Wireless Dual Radio 802.11ac (IL) Access Point J9848A
Key features
Three-spatial stream 802.11acMIMOAP
Up to 1.3 Gb/s on the 802.11ac radio and 450 Mb/s on the 2.4 GHz 802.11n radio
Built-in spectral analysis scans the 2.4 GHz and 5 GHz bands to identify sources of RF
Comprehensive WLAN security with intrusion detection offers threat protection
Include lifetime hardware warranty 2.0 with 24x7 phone support for three years at no additional cost
Introduction
HP 560 802.11ac Dual Radio Access Points deliver 1.3 GbE performance, faster application processing and increased range, connecting
wireless clients to the network and bringing intelligence to the network edge.
HP 560 802.11ac Dual Radio Access Point Series bring 1.3 GbE performance, faster application processing, and increased range to
802.11 clients. Ideal for dense client environments and high bandwidth applications, the access points can be powered by Power over
Ethernet (PoE) and offer full compatibility with legacy 802.11 clients and existing HP wireless controllers.
The access points can be used in managed as well as autonomous* mode without a controller. The access points provide Radio
Frequency spectrum analysis with detection and classification of non-IEEE 802.11 interference and has the ability to automatically
avoid interference. Wireless security is comprehensive when operating with a controller; with integrated wireless IDS/IPS, support for
internal and external authentication, authorization, and accounting (AAA) servers; built-in stateful firewall; per-user VLAN mapping;
and authentication. Note: Autonomous mode support will be added later in 2014.
Features and benefits
Management
Wi-Fi Clear Connect
provides a system-wide approach to improving WLAN reliability by proactively determining and adjusting to changing RF
conditions; helps optimize WLAN performance by detecting interference from Wi-Fi and non-Wi-Fi sources using spectrum
analysis capabilities built into the access points, identifying rogue activity, and making decisions at a system-wide level.
Advanced radio resource management
Automatic radio power adjustments
include real-time power adjustments based on changing environmental conditions and signal coverage adjustment
Automatic radio channel
provides intelligent channel switching and real-time Interference detection
Intelligent client load balancing
determines number of clients across neighboring APs and adjusts client allocation to balance the load
Airtime fairness
provides equal RF transmission time for wireless clients
Spectrum analysis
QuickSpecs
HP 560 802.11ac Dual Radio Access Point Series
Overview
DA - 14918 Worldwide — Version 2 — April 29, 2014 Page 1

HP J9845A Specifications

General

Product Number	J9845A
Device Type	Wireless Access Point
Wireless Standards	IEEE 802.11a/b/g/n/ac
Frequency Bands	2.4 GHz and 5 GHz
Maximum Data Rate	1.3 Gbps
Power over Ethernet (PoE)	Yes
Ethernet Technology	Gigabit Ethernet
PoE Standard	IEEE 802.3af
Ethernet Ports	1
Wireless LAN Standard	IEEE 802.11n
Wireless Transmission Speed	1300 Mbps
Form Factor	Ceiling Mountable, Wall Mountable
Antennas	Integrated
Power Source	PoE
Security Features	WPA2, WPA
Management	Web-based management
MIMO Technology	Yes

Summary

Overview

Key features

Features and benefits

Details the advantages and benefits of using the HP 560 Access Point series.

Management

Wi-Fi Clear Connect

System-wide approach to improving WLAN reliability by adjusting to RF conditions.

Advanced radio resource management

Features for optimizing radio performance, channel selection, and load balancing.

Spectrum analysis

Tools for analyzing spectrum, detecting interference, and evaluating channel quality.

Integrated Wireless IDSIPS

Detects and mitigates unknown and rogue wireless devices.

Access point management

Provides secure management via web browser, CLI, and SNMP.

HP Intelligent Management Center and Wireless Services Manager Software

Software for central management of discovery, logging, status, and configuration.

Diagnostics

Enhanced AP survivability

Quality of Service (QoS)

Connectivity

IEEE 802.3 Power over Ethernet (PoE)

Mobility

Three spatial stream MIMO technology

Bandsteering

Anywhere, anytime wireless coverage

Virtual Service Communities (VSCs)

AP client access control functions

Manages wireless client access using IEEE 802.1X and MAC authentication.

Security

Integrated IDS support

Provides automated AP and client classification and attack detection.

IEEE 802.1 X support

Enables port-based user authentication with EAP support.

Warranty and support

Lifetime Warranty 2.0

Electronic and telephone support

Software releases

Technical Specifications

10 ports and slots

Describes the physical network interfaces and slots on the access point.

AP characteristics

Lists radio types, operation modes, and Wi-Fi certifications.

Physical characteristics

Memory and processor

Environment

Electrical characteristics

Details power rating, PoE compliance, and notes.

Frequency band and Operating channels

Lists supported frequency bands and operating channels by region.

Radio

Features

Radio characteristics

Provides detailed data rates, receiver sensitivity, and transmit power.

Standards and Protocols

Lists supported wireless standards and protocols for the series.

Mobility