HP 425 802.11n User Manual

In
The HP 425 AP is a Wi-Fi Alliance authorized Wi-Fi CERTIFIED
802.11n/a/b/g product. The Wi-Fi CERTIFIED Logo is a
certification mark of the Wi-Fi Alliance.
HP 425 802.11n Access Point Quickstart
This Quickstart shows you how to install and get started using the HP 425 Dual Radio 802.11n Access Point, hereafter referred to as the AP.
Important: Minimum controller software versions are required to operate this AP. For more information, see the HP MSM3xx / MSM4xx and HP 425 Access
Points Release Notes v6.2.x. The latest HP documentation is available at www.hp.com/support/manuals.
Hardware overview
AP part numbers
JG654A (WW), JG653A (AM), JG655A (JP), JG656A (IL).
Package contents
The AP, mounting hardware, rubber feet, MAC address label, and
documentation.
1: Status LED
4: Ethernet port 7: Rubber feet (4)
2: Reset button 5: Power connector 8: 2.4 GHz antenna ports (2)
3: Console port 6: 5 GHz antenna ports (2)
9: Mounting hook holes (3)
25 26262423221
7 28 2829

HP 425 802.11n Specifications

General

Brand	HP
Model	425 802.11n
Category	Wireless Access Point
Language	English

Summary

Hardware Overview

AP Part Numbers and Package Contents

Lists the various part numbers for the HP 425 Access Point and details the items included in the package.

Ports and Radio Configuration

Detailed Port Descriptions

Explains the Ethernet, Console, Antenna, and Power ports on the AP, including cautions.

Radio and Antenna Specifications

Describes the dual-radio configuration (802.11n/a and 802.11n/b/g) and MIMO antennas.

Installation Safety and Precautions

General Installation Warnings

Covers professional installation requirements, local regulations, and safety guidelines.

Environmental and Safety Considerations

Details plenum installation, safety warnings, and requirements for a clean environment.

Powering the Access Point

Explains power options like PoE switches, injectors, and power adapters.

Installation Site and Methods

Selecting an Optimal Installation Site

Provides guidelines for choosing the best location for AP installation based on RF and environmental factors.

Preparing for Physical Installation

Steps before mounting, like recording MAC/serial numbers and connecting cables.

Mounting Options

Covers placement on a table/shelf, mounting on a wall, and installing on a suspended ceiling.

Ceiling Mount Installation Details

Ceiling Tile Mounting Procedure

Detailed steps for attaching the AP bracket and AP to a ceiling tile.

AP Mounting, Removal, and Controllers

Attaching and Removing the AP

Instructions for securing the AP to its mounting bracket and detaching it.

Controller Connectivity Requirements

Explains the necessity of establishing a management tunnel with an HP controller.

AP Status Indicators and Antennas

Understanding AP Status LEDs

Explains the meaning of different LED states (Green, Blue, Orange) on the AP.

Approved Optional Antennas

Lists the specific antenna (JG696A) approved for use with the HP 425 Access Point.