2 Using Quick setup
Overview
Quick setup provides an easy way to quickly configure settings on the M220 for several
different networking scenarios. Just pick the scenario that most closely resembles your
installation and fill in the appropriate fields.
Automatically running Quick setup the first time you log in
The first time you log in to the management tool (see the HP M220 802.11n Access Point
Quickstart for first time login procedure), the HP end user license agreement displays. When
you accept the agreement, a page displays to enable you to select your country so that wireless
radio settings are configured appropriately. Select Save to display the first page in the Quick
setup wizard.
This page lets you choose one of five configuration scenarios to use as the basis for your setup,
as described in the following sections.
Basic wireless network
Choose this option if you want to create a single wireless network to provide wireless
connectivity for your users. This option can be used to connect the M220 directly to a
broadband router or to an existing wired network, using static IP, DHCP, or IPv6 addressing.
To Next Page
Loading...
Need help?
General
