Self Diagnostics menu
Menu item Description
Run Network Test The network test provides information on the following:
●
Diagnostics summary
●
Troubleshooting
●
Configuration summary
Run Fax Test Test the product's fax capabilities
Fax Setup menu
In the following table, items that have an asterisk (*) indicate the factory default setting.
Menu item Sub-menu item Sub-menu item Description
Fax Set-Up Utility This is a tool for configuring the fax settings. Follow the on-
screen prompts and select the appropriate response for
each question.
Basic Setup Time/Date (Settings for time
format, current
time, date format,
and current date.)
Sets the time and date setting for the product.
Fax Header Enter your fax
number.
Enter company
name.
Sets the identifying information that is sent to the receiving
product.
Identifies the fax sender (optional)
Answer Mode Automatic*
Manual
TAM
Fax/Tel
Sets the type of answer mode. The following options are
available:
●
Automatic: The product automatically answers an
incoming call on the configured number of rings.
●
Manual: The user must touch the Start Fax button or
use an extension phone number to make the product
answer the incoming call.
●
TAM: A telephone answering machine (TAM) is
attached to the Auxilary phone port of the product.
The product will not pick up any incoming call, but will
listen for fax tones after the answering machine has
picked up the call.
●
Fax/Tel: The product must automatically pick up the
call and determine if the call is a voice or fax call. If
the call is a fax call, the product handles the call as
usual. If the call is a voice call, an audible synthesized
ring is generated to alert the user of an incoming voice
call.
50 Chapter 2 Solve problems ENWW
To Next Page
Loading...
