Basic operation
The staple stacker staples the printed paper that is fed through the printer and delivers it to the stacking
tray.
The formatter controls the staple stacker. The formatter monitors the condition of the staple stacker
using the option interface. The formatter signals the delivery command through the option interface when
the staple stacker is ready for paper feed. When the signal is received, the staple stacker drives each
load to deliver the paper. The functions of the staple stacker are broadly classified into three systems:
●
Control system
●
Feed/stack system
●
Staple system
Figure 4-42 Stapler/stacker operation
Power ON sequence
The following figure shows the sequences of the staple stacker from power-ON until STBY period.
156 Chapter 4 Theory of operation ENWW
To Next Page
Loading...