CPU initialization
ID check
Option interface communication ready
Power-ON
Stapling
homeposition check
Failure check
Stand by
Door open
check
Initial drive for
stapling motor
Jogger guide
homeposition check
Upper stacking roller
homeposition check
Initial drive for
Leading end alignment-separation motor
Initial drive for
jogger motor
Initial drive for
feed motor
Initial drive for
self prime sensor
Initial drive for
stamping
Option interface communication start
Residual paper
check
Figure 4-43 Power ON sequence
Control system
The control system controls the feed/stack system and the staple system according to the commands
from the formatter. The control system consists of the staple stacker driver PCA. The staple stacker
driver PCA that controls each load performs feed/stack and staple operations.
ENWW Stapler/stacker component 157
To Next Page
Loading...