Stapler unit
1. Remove the following components or assemblies:
●
ADF. See
ADF assembly on page 204.
●
Scanner. See
Scanner assembly on page 232.
●
Stapler left cover. See
Left cover on page 262.
●
Stapler front door and stapler unit cover. See
Front door and stapler unit cover
on page 266.
2. Disconnect two connectors (callout 1) and remove one screw (callout 2).
1
2
Figure 5-150 Remove the stapler unit (1 of 2)
3. Slide the stapler unit out of the stapler chassis to remove it.
Figure 5-151 Remove the stapler unit (2 of 2)
ENWW Stapler/stacker (HP LaserJet M5035xs only) 273
To Next Page
Loading...