4. Release two tabs (callout 3) and remove the front door interlock switch.
Figure 5-173 Remove the front door interlock switch (2 of 3)
5. Disconnect one connector (callout 4; J2101) from the stapler PCA and pass the wire harness
through the hole in the stapler chassis (callout 5).
5
4
Figure 5-174 Remove the front door interlock switch (3 of 3)
6. Remove the front door interlock switch.
ENWW Stapler/stacker (HP LaserJet M5035xs only) 287
To Next Page
Loading...