6. Release one tab (callout 3) and slightly pivot the front duplexer guide up to release it. Remove the
front duplexer guide.
3
Figure 5-262 Remove the high-voltage power supply assembly (4 of 9)
7. Release two tabs (callout 4) and slightly lift up on the rear duplexer guide (callout 5) to release it.
Remove the rear duplexer guide.
4
5
Figure 5-263 Remove the high-voltage power supply assembly (5 of 9)
ENWW Print engine (base unit) 349
To Next Page
Loading...