Right side tray rail(s)
NOTE The single tray HCI contains one right side tray rail. The multi tray HCI contains three
right side tray rails.
1. Remove the tray(s).
2. Remove one screw (callout 1).
1
Figure 5-313 Remove the HCI right side tray rail(s) (1 of 2)
3. Remove the HCI right side tray rail.
Figure 5-314 Remove the HCI right side tray rail(s) (2 of 2)
4. Repeat this procedure for the remaining HCI right side tray rails.
ENWW High capacity input feeder 381
To Next Page
Loading...