HP M5025 - LaserJet MFP B/W Laser - Page 412

Left side tray rail(s)
NOTE The single tray HCI contains one left side tray rail. The multi tray HCI contains three left
side tray rails.
1. Remove the tray(s).
2. Remove one screw (callout 1) and then remove the left side cover (callout 2).
1
2
Figure 5-315 Remove the HCI left side tray rail(s) (1 of 3)
3. Remove one screw (callout 3).
3
Figure 5-316 Remove the HCI left side tray rail(s) (2 of 3)
382 Chapter 5 Removal and replacement ENWW