Menu item Sub-menu item Values Description
Calibration/Cleaning
Auto Cleaning
Enabled
Disabled (default)
When auto-cleaning is on, the device prints a cleaning
page when the page count reaches the value that is set
in Cleaning Interval. This item requires that a duplexer
to be installed. If a duplexer is not installed, use Create
Cleaning Page and Process Cleaning Page to
manually create and process the cleaning page.
NOTE Available on the HP LaserJet
M5035X and HP LaserJet M5035XS MFP.
Cleaning Interval 1000 (default)
2000
5000
10000
20000
Set the interval when the cleaning page should be
printed. The interval is measured by the number of
pages printed.
NOTE Available on the HP LaserJet
M5035X and HP LaserJet M5035XS MFP.
Auto Cleaning Size Letter
A4
Select the size of paper used for the cleaning page.
NOTE Available on the HP LaserJet
M5035X and HP LaserJet M5035XS MFP.
Create Cleaning Page Create (button) Generate a page for cleaning excess toner off the
pressure roller in the fuser. The page has instructions
that guide you through the cleaning process.
NOTE Not available when an automatic
duplexer is installed.
Process Cleaning Page Process (button) Process the cleaning page that was created by using
the Create Cleaning Page menu item. The process
takes up to 2.5 minutes.
If an automatic duplexer is installed, this item creates
the cleaning page and processes it.
Table 3-16 Print Quality menu (continued)
66 Chapter 3 Manage and maintain the device ENWW
To Next Page
Loading...