Menu item Sub-menu item Values Description
●
FastRes 1200: Produces 1200-dpi quality for fast,
high-quality printing of business text and
graphics.
●
ProRes 1200: Produces 1200-dpi quality for fast,
high-quality printing of line art and graphic images
NOTE It is best to change the Resolution
setting in the program or print driver (program
and print driver settings override control-panel
settings).
REt Off
Light
Medium (default)
Dark
Use the Resolution Enhancement technology (REt)
setting to produce print with smooth angles, curves,
and edges.
REt does not affect print quality if the print resolution is
set to FastRes 1200 or ProRes 1200. All other print
resolutions benefit from REt.
NOTE It is best to change the REt setting in
the program or print driver (program and print
driver settings override control-panel
settings).
Economode Enabled
Disabled (default)
Use Economode to use less toner per page.
Selecting Enabled extends the life of the toner supply
and reduces cost per page. However, it also reduces
print quality. The printed image is lighter, but it is
adequate for printing drafts or proofs.
NOTE It is best to enable the Economode
setting in the program or print driver (program
and print driver settings override control-panel
settings).
CAUTION HP does not recommend full-time
use of Economode. If Economode is used full-
time, the toner supply might outlast the
mechanical parts in the print cartridge.
Toner Density Choose from a range of 1
to 5. 3 is the default.
Lighten or darken the print on the page by setting the
Toner Density. Select a setting from 1 (light) to 5 (dark).
The default setting of 3 produces the best results.
Table 3-16 Print Quality menu (continued)
ENWW Use the Administration menu 65
To Next Page
Loading...