HP M750 series

Table 3-36 Jetdirect Menu (continued)
First level Second level Third level Fourth level Values Description
SNMP Test Yes
No*
Checks operation of
SNMP
communications by
accessing predefined
SNMP objects on the
product.
Select the Yes option
to choose this test, or
the No option to not
choose it.
Data Path Test Yes
No*
This test helps to
identify data path and
corruption problems
on an HP postscript
level 3 emulation
product. It sends a
predefined PS file to
the product, However,
the test is paperless;
the file will not print.
Select the Yes option
to choose this test, or
the No option to not
choose it.
Select All Tests Yes
No*
Use this item to select
all available
embedded tests.
Select the Yes option
to choose all tests.
Select the No option
to select individual
tests.
Execution Time [H] Range: 1 – 24 hours
Default = 1 hour
Specify the length of
time (in hours) that an
embedded test will be
run. If you select zero
(0), the test runs
indefinitely until an
error occurs or the
product is turned off.
Data gathered from
the HTTP, SNMP, and
Data Path tests is
printed after the tests
have completed.
Execute No*
Yes
No: Do not initiate the
selected tests.
Yes: Initiate the
selected tests.
378 Chapter 3 Solve problems ENWW