Table 3-36 Jetdirect Menu (continued)
First level Second level Third level Fourth level Values Description
Packets Received Range: 0 – 65535
Default = 00000
Shows the number of
packets received from
the remote host since
the most recent test
was initiated or
completed. The
default is 0.
Percent Lost Range: 0 – 100
Default = 000
Shows the percent (0
to 100) of ping test
packets that were
sent with no response
from the remote host
since the most recent
test was initiated or
completed.
RTT Min Range: 0 – 4096
Default = 0000
Shows the minimum
detected roundtrip-
time (RTT) for packet
transmission and
response.
RTT Max Range: 0 – 4096
Default = 0000
Shows the maximum
detected roundtrip-
time (RTT) for packet
transmission and
response.
RTT Average Range: 0 – 4096
Default = 0000
Shows the average
round-trip-time (RTT),
from 0 to 4096
milliseconds, for
packet transmission
and response.
Ping In Progress Yes
No*
Shows whether a ping
test is in progress.
Yes: Indicates a test in
progress.
No: Indicates that a
test completed or was
not run.
Refresh Yes
No*
When viewing the ping
test results, this item
upgrades the ping test
data with current
results. Select the Yes
option to upgrade the
data, or the No option
to maintain the
existing data.
However, a refresh
automatically occurs
when the menu times
out or you manually
return to the main
menu.
380 Chapter 3 Solve problems ENWW
To Next Page
Loading...