HP M750 series

Table 3-42 Event codes for jams
Jam event code Jammed paper location
13.A3.D3 Leading edge of paper fed from Tray 3 is stopped before SR1
13.A3.D4 Leading edge of paper fed from Tray 4 is stopped before SR1 after passing Tray 4 SR1
13.A3.D5 Leading edge of paper fed from Tray 5 is stopped before SR1 after passing Tray 4 SR1
13.A3.D6 Leading edge of paper fed from Tray 6 is stopped before SR1 after passing Tray 4 SR1
13.A3.FF At auto-flushing : Paper stays at SR1
13.A4.D4 Leading edge of paper fed from Tray 4 is stopped before Tray 4 SR1
13.A4.D5 Leading edge of paper fed from Tray 5 is stopped before Tray 4 SR1 after passing SR81
13.A4.D6 Leading edge of paper fed from Tray 6 is stopped before Tray 4 SR1 after passing SR81
13.A4.FF At auto-flushing : Paper stays at Tray 4 SR1
13.A5.D5 Leading edge of paper fed from Tray 5 is stopped before SR81
13.A5.D6 Leading edge of paper fed from Tray 6 is stopped before SR81 after passing SR91
13.A5.FF At auto-flushing: paper stays at SR81
13.A6.D6 Leading edge of paper fed from Tray 6 is stopped before SR91
13.A6.FF At auto-flushing : Paper stays at SR91
13.B2.A1 Paper stays at PS5 – media longer than allowed from Tray 1
13.B2.A2 Paper stays at PS5 - media longer than allowed from Tray 2
13.B2.A3 Paper stays at PS5 - media longer than allowed from Tray 3
13.B2.A4 Paper stays at PS5 - media longer than allowed from Tray 4
13.B2.A5 Paper stays at PS5 - media longer than allowed from Tray 5
13.B2.A6 Paper stays at PS5 - media longer than allowed from Tray 6
13.B2.AD Paper stays at PS5 - media longer than allowed from Duplexer
13.B2.D1 Leading edge of paper fed from Tray 1 is stopped before PS5
13.B2.D2 Leading edge of paper fed from Tray 2 is stopped before PS5
13.B2.D3 Leading edge of paper fed from Tray 3 is stopped before PS5 after passing SR1
13.B2.D4 Leading edge of paper fed from Tray 4 is stopped before PS5 after passing SR1
13.B2.D5 Leading edge of paper fed from Tray 5 is stopped before PS5 after passing SR1
13.B2.D6 Leading edge of paper fed from Tray 6 is stopped before PS5 after passing SR1
13.B2.DD Duplex re-feed paper is stopped between PS6 and PS5
13.B2.FF At power on, door close, or auto-flushing: paper stays at PS5
13.B4.FF At power on, door close, or auto-flushing : paper stays at PS7/PS8
13.B9.Az
NOTE: z is the fuser mode, see Fuser
modes for jam event codes (Z).
Paper stays at PS6
ENWW Clear jams 493