HP M750 series

Use manual print modes
Try the following multi-purpose (MP) modes to see if they solve the image-quality problems. To access the
manual print modes, open the following menus:
●
Administration
●
General Settings
●
Print Quality
●
Adjust Paper Types
Table 3-56 MP modes under the Adjust Paper Types sub menu
Print Mode
●
AUTOSENSE MODE
●
NORMAL MODE
●
LIGHT MODE
●
HEAVY MODE
●
CARDSTOCK MODE
●
TRANSPARENCY MODE
●
TRANSPARENCY MODE 2
●
ENVELOPE MODE
●
LABEL MODE
●
TOUGH MODE
●
EXTRA TOUGH MODE
●
HEAVY GLOSSY MODE
●
X-HVY GLOSSY MODE
●
ROUGH MODE
●
CARD GLOSSY MODE
●
4MM TRNS MODE
●
LIGHT ROUGH MODE
NOTE: Not all print modes are available for all paper types.
RESISTANCE MODE Set to Up to resolve print-quality issues caused by poor
secondary transfer in low-humidity environments with resistive
or rough surface media.
514 Chapter 3 Solve problems ENWW