HP MicroServer

Troubleshooting 43
NOTE: For the location of server LEDs and information on their statuses, refer to the server
documentation.
Possible causes:
• Improperly seated or faulty internal or external component
• Unsupported component installed
• Redundancy failure
• System overtemperature condition
Item See
1 Server maintenance and service guide, located on the HP website
(http://www.hp.com/products/servers/platforms
)
2 "Power-on problems flowchart (on page 37)"
3 "HP Insight Diagnostics ("ProLiant MicroServer Insight Diagnostics" on
page 23)"
4
•
"Hardware problems (on page 44)"
•
Server maintenance and service guide, located on the HP website
(http://www.hp.com/products/servers/platforms
)
5 "HP contact information (on page 76)"