HP MSR1002-4 User Manual

91
Field Descri
p
tion
root dispersion
Maximum error of the system clock relative to the primary reference
clock, in milliseconds.
Reachabilities
Reachability count of the clock source. 0 indicates that the clock
source is unreachable.
sync distance
Synchronization distance relative to the upper-level clock, in
seconds, and calculated from dispersion and roundtrip delay
values.
Precision Accuracy of the system clock.
version NTP version in the range of 1 to 4.
source interface
Source interface.
If the source interface is not specified, this field is Not specified.
Reftime Reference timestamp in the NTP message.
Orgtime Originate timestamp in the NTP message.
Rcvtime Receive timestamp in the NTP message.
Xmttime Transmit timestamp in the NTP message.
Filter order Sample information order.
Reference clock status
Status of the local clock. The field is displayed only when you use
the ntp-service refclock-master command to set the local clock as a
reference clock.
When the reach field of the local clock is 255, the field is displayed
as working normally. Otherwise, the field is displayed as working
abnormally.
Total sessions Total number of associations.
display ntp-service status
Use display ntp-service status to display NTP service status.
Syntax
display ntp-service status
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display NTP service status after time synchronization.
<Sysname> display ntp-service status
Clock status: synchronized
Clock stratum: 2
System peer: LOCAL(0)

HP MSR1002-4 Specifications

General

Model	MSR1002-4
Product Series	MSR1000
Total Ports	4
VPN Support	Yes
Firewall	Yes
Wireless	No
Input Voltage	100-240V AC
Power Consumption	30W
Port Type	Ethernet
Ports	4 x 10/100/1000Base-T
Additional Ports	1 x Console
Power Supply	Internal
Operating Temperature	0°C to 45°C