HP MSR1002-4 User Manual

258
startup enable
Use startup enable to trigger an event for the first Boolean sampling.
Use undo startup enable to disable the feature.
Syntax
startup enable
undo startup enable
Default
An event is triggered for the first Boolean sampling.
Views
Trigger-Boolean view
Predefined user roles
network-admin
Usage guidelines
For an event to be triggered when a trigger condition is met at the first Boolean sampling, execute the
startup enable command.
If the first sampling fails or the monitored object does not exist at the first sampling, the second sampling
is considered the first sampling.
Examples
# Trigger an event for the first Boolean sampling.
<Sysname> system-view
[Sysname] snmp mib event trigger owner owner1 name triggerA
[Sysname-trigger-owner1-triggerA] test boolean
[Sysname-trigger-owner1-triggerA-boolean] startup enable
Related commands
• comparison
• value
test
Use test to specify a trigger test type.
Use undo test to remove a trigger test type.
Syntax
test { boolean | existence | threshold }
undo test { boolean | existence | threshold }
Default
No trigger test type is specified.
Views
Trigger view

HP MSR1002-4 Specifications

General

Model	MSR1002-4
Product Series	MSR1000
Total Ports	4
VPN Support	Yes
Firewall	Yes
Wireless	No
Input Voltage	100-240V AC
Power Consumption	30W
Port Type	Ethernet
Ports	4 x 10/100/1000Base-T
Additional Ports	1 x Console
Power Supply	Internal
Operating Temperature	0°C to 45°C