HP MSR1002-4 User Manual

232
Default
A trigger does not have a description.
Views
Trigger view
Predefined user roles
network-admin
Parameters
trigger-description: Specifies a description, a case-sensitive string of 1 to 255 characters.
Examples
# Configure the description triggerA is configured for configured for network management events for
the trigger with the owner owner1 and the name triggerA.
<Sysname> system-view
[Sysname] snmp mib event trigger owner owner1 name triggerA
[Sysname-trigger-owner1-triggerA] description triggerA is configured for network
management events
Related commands
snmp mib event trigger
display snmp mib event
Use display snmp mib event to display Event MIB configuration and statistics.
Syntax
display snmp mib event
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display Event MIB configuration and statistics.
<Sysname> display snmp mib event
TriggerFailures : 0
EventFailures : 0
SampleMinimum : 1
SampleInstanceMaximum : 0
SampleInstance : 0
SampleInstancesHigh : 0
SampleInstanceLacks : 0
Trigger entry triggerA owned by owner1:
TriggerComment : triggerA is to monitor the state of the interface
TriggerTest : boolean
TriggerSampleType : absoluteValue

HP MSR1002-4 Specifications

General

Model	MSR1002-4
Product Series	MSR1000
Total Ports	4
VPN Support	Yes
Firewall	Yes
Wireless	No
Input Voltage	100-240V AC
Power Consumption	30W
Port Type	Ethernet
Ports	4 x 10/100/1000Base-T
Additional Ports	1 x Console
Power Supply	Internal
Operating Temperature	0°C to 45°C