HP MSR4080 Configuration Guide

16
 MSR954 (JH296A/JH297A/JH298A/JH299A/JH373A).
 MSR958 (JH300A/JH301A).
Command and hardware compatibility
Commands and descriptions for centralized devices apply to the following routers:
•
MSR1002-4/1003-8S.
•
MSR2003.
•
MSR2004-24/2004-48.
•
MSR3012/3024/3044/3064.
•
MSR954 (JH296A/JH297A/JH298A/JH299A/JH373A).
•
MSR958 (JH300A/JH301A).
Commands and descriptions for distributed devices apply to the following routers:
•
MSR4060.
•
MSR4080.
IGMP snooping configuration task list
You can configure IGMP snooping for VLANs.
Tasks at a glance
Configuring basic IGMP snooping features:
• (Required.) Enabling IGMP snooping
• (Optional.) Specifying an IGMP snooping version
• (Optional.) Setting the maximum number of IGMP snooping forwarding entries
• (Optional.) Setting the IGMP last member query interval
Configuring IGMP snooping port features:
• (Optional.) Setting aging timers for dynamic ports
• (Optional.) Configuring static ports
• (Optional.) Configuring a port as a simulated member host
• (Optional.) Enabling fast-leave processing
• (Optional.) Disabling a port from becoming a dynamic router port
Configuring the IGMP snooping querier:
• (Optional.) Enabling the IGMP snooping querier
• (Optional.) Configuring parameters for IGMP general queries and responses
Configuring parameters for IGMP messages:
• (Optional.) Configuring source IP addresses for IGMP messages
• (Optional.) Setting the 802.1p priority for IGMP messages
Configuring IGMP snooping policies:
• (Optional.) Configuring a multicast group policy
• (Optional.) Enabling multicast source port filtering
• (Optional.) Enabling dropping unknown multicast data
• (Optional.) Enabling IGMP report suppression
• (Optional.) Setting the maximum number of multicast groups on a port
• (Optional.) Enabling the multicast group replacement feature

HP MSR4080 Specifications

General

Brand	HP
Model	MSR4080
Category	Network Router
Language	English