HP MSR4080

378
[RouterD] interface gigabitethernet 1/0/3
[RouterD-GigabitEthernet1/0/3] ipv6 pim sm
[RouterD-GigabitEthernet1/0/3] quit
# Enable IPv6 BIDIR-PIM.
[RouterD] ipv6 pim
[RouterD-pim6] bidir-pim enable
[RouterD-pim6] quit
4. On Router C, configure GigabitEthernet 1/0/1 as the C-BSR, and Loopback 0 as the C-RP for
the entire IPv6 BIDIR-PIM domain.
[RouterC-pim6] c-bsr 2002::2
[RouterC-pim6] c-rp 6001::1 bidir
[RouterC-pim6] quit
Verifying the configuration
1. Display the DF information of BIDIR-PIM:
# Display the DF information of IPv6 BIDIR-PIM on Router A.
[RouterA] display ipv6 pim df-info
RP address: 6001::1
Interface State DF-Pref DF-Metric DF-Uptime DF-Address
GE1/0/1 Win 100 2 01:08:50 FE80::200:5EFF:
FE71:2800 (local)
GE1/0/2 Lose 100 1 01:07:49 FE80::20F:E2FF:
FE38:4E01
# Display the DF information of IPv6 BIDIR-PIM on Router B.
[RouterB] display ipv6 pim df-info
RP address: 6001::1
Interface State DF-Pref DF-Metric DF-Uptime DF-Address
GE1/0/1 Win 100 1 01:24:09 FE80::200:5EFF:
FE71:2801 (local)
GE1/0/2 Win 100 1 01:24:09 FE80::20F:E2FF:
FE38:4E01 (local)
GE1/0/3 Lose 0 0 01:23:12 FE80::20F:E2FF:
FE15:5601
# Display the DF information of IPv6 BIDIR-PIM on Router C.
[RouterC] display ipv6 pim df-info
RP address: 6001::1
Interface State DF-Pref DF-Metric DF-Uptime DF-Address
Loop0 - - - - -
GE1/0/1 Win 0 0 01:06:07 FE80::20F:E2FF:
FE15:5601 (local)
GE1/0/2 Win 0 0 01:06:07 FE80::20F:E2FF:
FE15:5602 (local)
# Display the DF information of IPv6 BIDIR-PIM on Router D.
[RouterD] display ipv6 pim df-info
RP address: 6001::1
Interface State DF-Pref DF-Metric DF-Uptime DF-Address
GE1/0/1 Win 100 1 01:19:53 FE80::200:5EFF:
FE71:2803 (local)