Display assembly
Description Spare part number
Display panel assembly
NOTE: Display assemblies are spared at the subcomponent level only. For spare part information, see
Display assembly subcomponents on page 17.
not spared
Before removing the display assembly, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by rst unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4. Remove the bottom cover (see Bottom cover on page 25).
5. Remove the battery (see Battery on page 30).
6. Remove the internal base plate (see Internal base plate on page 42)
Remove the display assembly:
1. Disconnect the display cable from the system board.
2. Remove the 3 Phillips M2.5×5.0 screws (1) from the display hinges.
Component replacement procedures 53