EasyManuals Logo

HP mt43 User Manual

HP mt43
105 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #81 background imageLoading...
Page #81 background image
Resetting the Setup and Power-on passwords
You can reset the Setup and Power-on passwords as follows:
1. Turn o the computer and disconnect the power cord from the power outlet.
2. Remove the side access panel and the metal side cover.
3. Remove the password jumper from the system board header labeled PSWD/E49.
4. Replace the metal side cover and the side access panel.
5. Connect the computer to AC power, and then turn on the computer.
6. Turn o the computer and disconnect the power cord from the power outlet.
7. Remove the side access panel and the metal side cover.
8. Replace the password jumper.
9. Replace the metal side cover and the side access panel.
Power-on diagnostic tests
The Power-on diagnostics performs basic integrity tests of the hardware to determine its functionality and
conguration. If a diagnostic test fails during hardware initialization the unit simply stops. There are no
messages sent to video.
NOTE: You may try to restart the unit and run through the diagnostic tests a second time to conrm the rst
shutdown.
The following table lists the tests that are performed on the unit.
Table
10-2 Power-on diagnostic test
Test Description
Boot Block Checksum Tests boot block code for proper checksum value
DRAM Simple write/read pattern test of the rst 640k of memory
Serial Port Tests the serial port using simple port verication test to determine if ports are present
Timer Tests timer interrupt by using polling method
RTC CMOS battery Tests integrity of RTC CMOS battery
NAND ash device Tests for proper NAND ash device ID present
Resetting the Setup and Power-on passwords 71

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP mt43 and is the answer not in the manual?

HP mt43 Specifications

General IconGeneral
Form factorClamshell
Product typeMobile thin client
Product colorSilver
Country of originChina
Panel typeSVA
LED backlightYes
Display diagonal14 \
Native aspect ratio16:9
Keyboard layoutQWERTY
Pointing deviceTouchpad
Processor cache2 MB
Processor cores4
Processor modelPRO A8-9600B
Processor familyAMD PRO A8
Processor frequency2.4 GHz
Processor cache typeL2
Processor manufacturerAMD
Processor boost frequency3.3 GHz
Memory slots2x SO-DIMM
Internal memory8 GB
Memory clock speed2133 MHz
Internal memory typeDDR4-SDRAM
Memory layout (slots x size)2 x 4 GB
SSD capacityThe Solid State Drive's storage capacity in Gigabytes.
SSD interfaceSATA
Storage mediaSSD
SSD form factorM.2
Total storage capacity128 GB
Compatible memory cardsSD
Number of SSDs installed1
Discrete graphics card modelNot available
On-board graphics card modelAMD Radeon R5
Speakers manufacturerBang & Olufsen
Number of built-in speakers2
Front camera signal format720p
Battery capacity51 Wh
Number of battery cells3
AC adapter power45 W
Wi-Fi standards802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Bluetooth version4.2
Ethernet LAN data rates10, 100, 1000 Mbit/s
Charging port typeDC-in jack
USB 2.0 ports quantity0
Sustainability certificatesENERGY STAR
Operating system installedWindows 10 IoT Enterprise
Operating system architecture64-bit
Weight and Dimensions IconWeight and Dimensions
Depth226 mm
Width338 mm
Height18.9 mm
Weight1480 g

Related product manuals