Inserting a PC Card
CAUTION To prevent damage to the computer and external media cards, do not insert an
ExpressCard into a PC Card slot.
CAUTION To prevent damage to the connectors:
Use minimal force to insert a PC Card.
Do not move or transport the computer when a PC Card is in use.
The PC Card slot may contain a protective insert. The insert must be released and then removed before
you can insert a PC Card.
1. To release and remove the PC Card slot insert:
a. Press the PC Card eject button (1).
This action extends the button into position for releasing the insert.
b. Press the eject button again to release the insert.
c. Pull the insert out of the slot (2).
2. To insert a PC Card:
a. Hold the PC Card label-side up, with the connectors facing the computer.
6 Chapter 2 PC Cards ENWW
To Next Page
Loading...
