Commands and Responses
HP NonStop TMF Management Programming Manual—540140-008
5-132
INFO TMF
Tokens in Response Buffer
ZTMF-TKN-VolumeName
specifies the current TMF configuration volume.
ZTMF-TKN-ATFileFormat
specifies the current audit-trail file format. A value of 1 indicates format 1. A value
of 2 indicates format 2.
ZTMF-MAP-Info-Tmf
is an extensible structured token containing INFO TMF command token values.
This token contains the following fields:
ZGoRemote
specifies the method currently being used to send GoRemote requests to the
TMP to establish distributed transactions. The following values are valid:
ZPioBuffer
specifies the current PIO buffer settings (which establish the transport buffer
configuration). See the struct ZTMF-DDL-PioBuffer under Private Token and
Field Types on page 4-6.
ZTmpWaitTimer
specifies the current TMP wait timer setting (which determines how often the
TMP wakes to check for pending transaction completions). See the struct
ZTMF-DDL-TmpWaitTimer under Private Token and Field Types on page 4-6.
ZTransProtocol
specifies the current transaction flush protocol used to flush transactions upon
their completion. The following values are valid:
ZDisasterRecovery
Specifies Disaster Recovery setting. The TMF Disaster Recovery Mode is used
to control TMF operations in special Disaster Recovery situations. See
ZTMF-VAL-GoRemote-Pio PIOs are being used.
ZTMF-VAL-GoRemote-PioPri PIOs are being used and they are
being put ahead of transaction
completions in the TMP queue.
ZTMF-VAL-GoRemote-Msg The Message System is being used.
ZTMF-VAL-TransProto-MMI MMI protocol.
ZTMF-VAL-TransProto-Standard Standard protocol.
To Next Page
Loading...
