HP NonStop TMF - Table A-7. Default Program File Names for Processes

TMF Configuration Limits and Defaults
HP NonStop TMF Management Programming Manual—540140-008
A-5
TMP process type
Number of processes 1 primary and
1 backup process
1 primary and
1backupprocess
Extended segment size See discussion, EXTENDEDSEGSIZE Option
Considerations for the TMP on page 3-100 of the
TMF Reference Manual.
Volume recovery process type
Number of processes 0 through 8. (If the
system has fewer than
8 processors, the
upper limit is the
number of processors.)
0 if not needed; 1 or
more as needed
Extended segment size 8 through 128 MB 8 MB
Number of data volumes assigned to
each volume recovery process’s work
queue
1 through 100 As many as available
(up to 100)
Delay between the TMP’s attempts to
restart a failed TMF process
30 seconds through
5minutes
30 seconds (at first
attempt)
Table A-7. Default Program File Names for Processes
TMF Process Default Program File Name
Audit dump
$SYSTEM.SYSnn.TMFDR
Audit overflow
$SYSTEM.SYSnn.TMFDR
Audit restore
$SYSTEM.SYSnn.TMFDR
Backout
$SYSTEM.SYSnn.TMFBOUT
Catalog
$SYSTEM.SYSnn.TMFCTLG
File recovery
$SYSTEM.SYSnn.TMFFRCV
File recovery list
$SYSTEM.SYSnn.TMFFRLS
Online dump
$SYSTEM.SYSnn.TMFDR
Online restore
$SYSTEM.SYSnn.TMFDR
TMFMON2
$SYSTEM.SYSnn.TMFMON2
TMP
$SYSTEM.SYSnn.TMFTMP
Volume recovery
$SYSTEM.SYSnn.TMFVRCV
Table A-6. Process Limits and Defaults (page3of3)
Parameter Limits Default