HP NonStop TMF - Private Token and Field Types

Common Definitions
HP NonStop TMF Management Programming Manual—540140-008
4-6
Private Token and Field Types
ZTMF-DDL-MSG-MAXBUFFER
is a message buffer of the maximum size for use with the SPI procedures—TACL
does not accept a buffer of this size.
ZTMF-VAL-BUFLEN
is the recommended buffer size (in bytes) for commands sent to TMF.
ZTMF-VAL-BUFLEN-W
is the recommended buffer size (in words) for commands sent to TMF.
ZTMF-VAL-MAXBUFLEN
is the maximum buffer size (in bytes) for commands sent to TMF—TACL does not
support buffers of this size.
ZTMF-VAL-MAXBUFLEN-W
is the maximum buffer size (in words) for commands sent to TMF—TACL does not
support buffers of this size.
ZTMF-VAL-MINBUFLEN
is the minimum buffer size (in bytes) for commands sent to TMF.
ZTMF-VAL-MINBUFLEN-W
is the minimum buffer size (in words) for commands sent to TMF.
Private Token and Field Types
A private token is a token defined and used exclusively by the subsystem that defines
it. The following paragraphs describe the private token and field types defined by TMF.
ZTMF-TYP-CHILDREN
is a 16-bit signed integer specifying the nodes accessed by a network-distributed
transaction. It has a token data type of ZSPI-TDT-INT, it is used to define the
ZTMF-TKN-CHILDREN token, and it is part of the ZTMF-DDL-STATUS-TX-
CHILDREN extensible structured token.
def ZTMF-DDL-MSG-MAXBUFFER.
02 Z-MSGCODE type ZSPI-DDL-INT.
02 Z-BUFLEN type ZSPI-DDL-UINT.
02 Z-OCCURS type ZSPI-DDL-UINT.
02 Z-FILLER type ZSPI-DDL-BYTE
Occurs 0 to ZTMF-VAL-MAXBUFLEN times
depending on Z-OCCURS.
end.