Commands and Responses
HP NonStop TMF Management Programming Manual—540140-008
5-157
STATUS ATFILE
Usage Guidelines
Any user can issue this command. TMF must be started.
Multiple response records are allowed to enable the command to return all the
requested information.
If an audit trail is altered to turn AUDITDUMP on after some audit-trail files have been
filled, those files are never dumped. When AUDITDUMP is turned on, the first file to be
dumped is the one that is current at the time of the ALTER command. Previous files
keep their dump status value of ZTMF-VAL-DumpStatusNotDumping.
To Next Page
Loading...
Need help?
General