Event Messages
HP NonStop TMF Management Programming Manual—540140-008
6-430
Descriptions of Event Messages
ZTMF-TKN-ZLTCH-State
specifies the new commit-hold state that could not be set. The values are:
ZEMS-TKN-Emphasis
is set to True for this event.
Effect
The commit-hold state of the specified audit-trail volume remains unchanged.
Recommended Action
For information on the corrective action for the indicated error number, see the
Guardian Procedure Errors and Messages Manual. Try to resolve the problem. The
subsystem periodically attempts to restart the TMP. If the problem persists, contact
your service provider and provide all relevant information as follows:
Descriptions of the problem and accompanying symptoms
Details from the message(s) generated
Supporting documentation such as Event Management Service (EMS) logs, trace
files, and a CPU dump, if applicable
If your local operating procedures require contacting the Global Customer Support
Center (GCSC), supply your system number and the numbers and versions of all
related products as well.
ZTMF-VAL-ZLTCH-Unconfigured Unconfigured.
ZTMF-VAL-ZLTCH-On On.
ZTMF-VAL-ZLTCH-Off Off.
ZTMF-VAL-ZLTCH-Activate Activated.
ZTMF-VAL-ZLTCH-Suspend Suspended.
ZTMF-VAL-ZLTCH-Reviving Reviving.
ZTMF-VAL-ZLTCH-Unsupported Unsupported.
To Next Page
Loading...
