Event Messages
HP NonStop TMF Management Programming Manual—540140-008
6-432
Descriptions of Event Messages
ZTMF-TKN-ZLTCH-State
This token occurs twice. The first occurrence specifies the new (current) commit-
hold state while the second occurrence specifies the old (previous) commit-hold
state. The values are:
ZEMS-TKN-Emphasis
is set to True for this event.
Effect
The commit-hold state of the specified active audit-trail volume is changed as
specified.
Recommended Action
Informative message only; no corrective action is needed.
ZTMF-VAL-ZLTCH-Unconfigured Unconfigured.
ZTMF-VAL-ZLTCH-On On.
ZTMF-VAL-ZLTCH-Off Off.
ZTMF-VAL-ZLTCH-Activate Activated.
ZTMF-VAL-ZLTCH-Suspend Suspended.
ZTMF-VAL-ZLTCH-Reviving Reviving.
ZTMF-VAL-ZLTCH-Unsupported Unsupported.
To Next Page
Loading...
