Event Messages
HP NonStop TMF Management Programming Manual—540140-008
6-438
Descriptions of Event Messages
ZTMF-TKN-AuditTrailID
is the subject token of the event message, and specifies which audit trail the
message applies to. The values are:
ZTMF-TKN-ZLTCH-State
This token occurs twice. The first occurrence specifies the new (current) commit-
hold state while the second occurrence specifies the old (previous) commit-hold
state. The values are:
ZTMF-TKN-ZLTCHTimeoutValue
This token occurs twice. The first occurrence specifies the new (current) commit-
hold timer value in seconds while the second occurrence specifies the old
(previous) commit-hold timer value in seconds.
ZTMF-TKN-ZLTCHTimeoutAction
This token occurs twice. The first occurrence specifies the new (current) commit-
hold timeout action while the second occurrence specifies the old (previous)
commit-hold timeout action. The values are:
ZEMS-TKN-Emphasis
is set to True for this event.
ZTMF-VAL-Mat Master audit trail
ZTMF-VAL-Aux01 Auxiliary audit trail #1
ZTMF-VAL-Aux02 Auxiliary audit trail #2
. . .
ZTMF-VAL-Aux15 Auxiliary audit trail #15
ZTMF-VAL-ZLTCH-Unconfigured Commithold is unconfigured.
ZTMF-VAL-ZLTCH-On Commithold is on.
ZTMF-VAL-ZLTCH-Off Commithold is off.
ZTMF-VAL-ZLTCH-Activate Commithold is activated.
ZTMF-VAL-ZLTCH-Suspend Commithold is suspended.
ZTMF-VAL-ZLTCH-Reviving Commithold is reviving.
ZTMF-VAL-ZLTCH-Unsupported Commithold is unsupported.
ZTMF-VAL-ZLTCH-ActionSuspend Suspend the commit-hold.
ZTMF-VAL-ZLTCH-ActionCrash Crash TMF.
To Next Page
Loading...
