Error and Warning Messages
HP NonStop TMF Management Programming Manual—540140-008
7-9
Errors
78 ZTMF-ERR-DISKMEDIARESET
You cannot change a DISKMEDIA attribute with a RESET command (within
this context).
79 ZTMF-ERR-DISKMEDIAWILD
Attributes for DISKMEDIA cannot contain wildcard (*) syntax (within this
context).
80 ZTMF-ERR-MEDIANOTALLOWED
The TAPEMEDIA attribute is only allowed with the MEDIUM TAPE attribute.
81 ZTMF-ERR-DISKMEDIAREQUIRED
At least one DISKMEDIA attribute entry is required with the MEDIUM DISK
attribute.
82 ZTMF-ERR-DISKMEDIANETWORKINVAL
The specified entry for the DISKMEDIA attribute is an invalid network volume
name. A network volume name cannot exceed 7 characters—including the $.
The ZTMF-TKN-DISKMEDIA token supplied within the error list provides
additional information.
83 ZTMF-ERR-INVALIDMEDIUMRESET
The tape or disk medium cannot be changed with a RESET command (within
this context).
87 ZTMF-ERR-MUSTHAVESYSTEMNAME
When a second system for parallel dumps is specified, the first system must
also be specified.
89 ZTMF-ERR-INVIGNOREDATAERRORS
The command specified an invalid IGNOREDATAERRORS option.
90 ZTMF-ERR-WILDORNAMENOTBOTH
The command must not contain both an explicit volume name and a wildcard.
91 ZTMF-ERR-MUSTSUPPLYVOLNAME
A volume name token (ZTMF-TKN-VOLUMENAME) is required, but was not
supplied.
To Next Page
Loading...
